- Openamp-system-reference - lists.openampproject.org

[Response requested] Scheduling a virtual sprint for OpenAMP System Reference in early 2022

by Nathalie Chan King Choy

Hi all, During this week's call, Arnaud suggested it could be helpful to have a virtual sprint sometime in the new year. The proposed duration is 1 week when participants could spend most of their time that week to work on this project & attend a daily sync up discussion. Please let us know what weeks are most likely feasible for you in this poll: https://doodle.com/poll/n4wb9698y8748c76?utm_source=poll&utm_medium=link Thanks & regards, Nathalie

4 years

1
0
0 0

Calling for agenda: 11/17 system reference call

by Nathalie Chan King Choy

Hi all, Notes from last call: https://github.com/OpenAMP/openamp-system-reference/wiki/OpenAMP-System-Ref… Initial agenda: * Arnaud: SDK to use upstream versions. * Tomas, Bill: Update from presentation at HPP call * Individual updates * What to work on before next Wednesday's call? Please let us know if you have additional agenda topics. Thanks & regards, Nathalie

4 years, 1 month

2
1
0 0

MCU to MCU in Zephyr

by Bill Mills

Etsam/All, Setup Zephyr as normal. I used the zephyr-sdk-0.13.1 for toolchain and qemu etc. I used a local python3 venv and pip3 to get west and cmake Right now you have to run west twice; once to build and once to run qemu. Don't use -p with west on the second one (optional and OK on first) $ west build -b mps2_an521 zephyr/samples/subsys/ipc/openamp $ west build -b mps2_an521 zephyr/samples/subsys/ipc/openamp -t run The sample does not use remoteproc just rpmsg. The mps2_an521 board is a dual cortex-M33 platform. It has QEMU and real HW support but I will not use the HW as it is expensive. An RFC PR to fix the need for 2 west invocations is here: https://github.com/zephyrproject-rtos/zephyr/pull/40240 Thanks go to Arnaud for the pointer to this sample. Thanks, Bill -- Bill Mills Principal Technical Consultant, Linaro +1-240-643-0836 TZ: US Eastern Work Schedule: Tues/Wed/Thur

4 years, 1 month

2
1
0 0

Zephyr and Xen

by Bill Mills

Dan/all, Looking closer, I am not sure the comments I saw on the Linaro project are relevant. The Linaro Stratos project is about making virtio work on multiple hypervisors including Xen. When I saw the comments below I therefore assumed they were about virtio. Looking more closely the developer seems to be using Xen native APIs and not virtio. Here are the Zephyr PR he mentions in the text body: https://github.com/zephyrproject-rtos/zephyr/pull/36691 https://github.com/zephyrproject-rtos/zephyr/pull/39960 His comments on Stratos project issue: ********************************************* Currently I am working on Xen support in Zephyr (main goal now is to start Zephyr as Dom0 and create 1 Zephyr guest). During development I am trying to upstream some features to Zephyr mainline. Currently I have 1 merged pull-request and 1 is now on review. Merged PR contains: Some of Xen public headers, which were placed in Zephyr tree (include/xen/public/); Hypercall interface to Xen for arm64 (arch/arm64/core/xen); PV console driver for DomUs. It is implemented as UART driver, but works with console ring-buffer instead of real hardware. Such solution was made because Zephyr has lot of good features for UART drivers (UART logging backend, shell backend, console with symbol processing stuff etc.). Also this driver can set up consoleio hooks for printk and stdout. It allows to receive boot logs ASAP after start with debug version of hypervisor (very helpful for boot debug). PR, that is on review contains: Support for Xen Enlighten page. Support for pre-defined event-channels (PV console, XenBus). UART PV console driver improvement - now it is interrupt driven through the console event channel. Dom0 console driver. It is also UART-like, but works with consoleio hypercalls for input and output (which are always available only for Dom0), instead of console ring-buffer. Also some other features are now under development: grant tables, XenBus and starting Zephyr as Domain-0. They are present on my github, but currently are not ready for review or upstream. Current status for these features: Grant tables: taken from Unikraft, ported to Zephyr code base and tested. Works, but currently is not finished yet. Planned to push it as next PR to Zephyr repo. XenBus: also taken from Unikraft, cleaned-up and ported to Zephyr. Tested: able to list directories, write and read from files in Xenstore. Driver registration on bus was not tested due to lack of any backend drivers, but Zephyr uses fully static configuration, so this should not be a problem. Zephyr Domain-0: currently I am working on this PoC and successfully started simple sample (samples/subsys/shell/shell_module) with Dom0 console driver on R-Car Gen3 hardware. It looks a little bit hacky due to static configuration in Zephyr (it does not use device tree in runtime, so we need to know Dom0 and GIC location on compile time to build and link with right addresses), but I think it is OK for PoC. Lot of problems during development are caused by the licensing - Zephyr is licensed under Apache-2.0, so I can not use GPL-2.0 code in there. Also when I am trying to use MIT code from Xen (public headers) or Unikraft (Xenbus and grant table drivers) it causes long Zephyr TSC negotiation to take MIT code inside the Zephyr tree. So It may take some time to add suitable Xen support in Zephyr upstream. But I will continue PoC development and share some of the updates here. Please, contact me if you need any other details. -- Bill Mills Principal Technical Consultant, Linaro +1-240-643-0836 TZ: US Eastern Work Schedule: Tues/Wed/Thur

4 years, 1 month

1
0
0 0

Calling for agenda items: 11/10 OpenAMP System Reference call

by Nathalie Chan King Choy

Hi all, Please let us know if you have any additional agenda topics for this week. * Individual updates * Arnaud: SDK to use upstream versions. * What to work on before next Wednesday's call? Notes from last week's call: https://github.com/OpenAMP/openamp-system-reference/wiki/OpenAMP-System-Ref… Thanks & regards, Nathalie

4 years, 1 month

1
0
0 0

Re: [OA-syst-ref] Calling for agenda items: 11/3 OpenAMP System Reference weekly

by Tanmay Shah

Hi Nathalie, Please add following to agenda: KV260 BSP Yocto flow status. Thanks, Tanmay Shah tanmay.shah(a)xilinx.com<mailto:tanmay.shah@xilinx.com> From: Openamp-system-reference <openamp-system-reference-bounces(a)lists.openampproject.org> on behalf of Nathalie Chan King Choy via Openamp-system-reference <openamp-system-reference(a)lists.openampproject.org> Reply-To: Nathalie Chan King Choy <nathalie(a)xilinx.com> Date: Monday, November 1, 2021 at 10:32 AM To: "openamp-system-reference(a)lists.openampproject.org" <openamp-system-reference(a)lists.openampproject.org> Subject: [OA-syst-ref] Calling for agenda items: 11/3 OpenAMP System Reference weekly Happy Monday! Please let us know if you have any additional agenda topics for this week. Here is what I have so far: * Individual updates * Nathalie: KV260 ordering, PMU ROM ELF updates * What to work on before next Wednesday’s call? Notes from last week’s call at https://github.com/OpenAMP/openamp-system-reference/wiki/OpenAMP-System-Ref… Thanks & regards, Nathalie

4 years, 1 month

1
0
0 0

Calling for agenda items: 11/3 OpenAMP System Reference weekly

by Nathalie Chan King Choy

Happy Monday! Please let us know if you have any additional agenda topics for this week. Here is what I have so far: * Individual updates * Nathalie: KV260 ordering, PMU ROM ELF updates * What to work on before next Wednesday's call? Notes from last week's call at https://github.com/OpenAMP/openamp-system-reference/wiki/OpenAMP-System-Ref… Thanks & regards, Nathalie

4 years, 1 month

1
0
0 0

Calling for agenda: 10/27 OpenAMP System Reference call

by Nathalie Chan King Choy

Hi all, Please let me know if you have additional agenda topics: Here's what I have so far: * Individual updates * Did anything interesting come out of OpenAMP System Reference presentation to LEDGE HPP group? * Any updates on recruiting TI or NXP to System Reference working group? * What to shoot to accomplish before next Wednesday's call? Reminder of action items from last time: * (In progress?) Tanmay: Check w/ Yocto team about "K26" vs "KV260" * Tanmay: Set autoboot to no & see if DHCP gets an IP address * (DONE) Nathalie: Find out if we document that info someplace (SOM schematic won't be published, just carrier card) * Tanmay: There is user guide on how to create boot.bin. Will find it & send out. * (DONE) Paul: Send link to wiki page Thanks & regards, Nathalie

4 years, 1 month

1
0
0 0

Changes to Zephyr SDK to run Xilinx zcu102 QEMU images

by Paul Sokolovsky

Hello, As I mentioned during last week's sync, I submitted changes to Zephyr SDK to update/extend its Xilinx QEMU coverage to allow to run end-to-end OpenAMP images (as produced by OE/PetaLinux). Associated instructions are at https://github.com/pfalcon/openamp-system-reference/wiki/RunningXilinxOEWit… . The changes will go into the next Zephyr SDK release. -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

4 years, 1 month

1
0
0 0

Xilinx BOOT.BIN with bif file Generation documents

by Tanmay Shah

Hi Bill, Following documents / User Guide can help to understand how BOOT.BIN is generated. 1. Petalinux Tools Userguide: https://www.xilinx.com/content/dam/xilinx/support/documentation/sw_manuals/… * Page – 31 explains how to generat BOOT.BIN using petalinux (petalinux-package tool) * Internally it should be using bootgen utility 2. Bootgen userguide : https://www.xilinx.com/content/dam/xilinx/support/documentation/sw_manuals/… * This user guide explains whole bif (boot image format) file format (Page – 45) * It also explains how to use bootgen command. i. In general I use something like following to generat BOOT.BIN: bootgen -arch <platform name> -image boot.bif -w -o BOOT.BIN Platform name could be: zynq, zynqmp or versal We mention all the images’ path in bif file, i.e. fsbl, ATF, u-boot etc.. and bootgen can combine them all in one BOOT.BIN file and we can use that BOOT.BIN to boot to u-boot. In Yocto this is taken care by Vitis xsct tool. So we don’t have to generate it manually. Thanks, Tanmay Shah tanmay.shah(a)xilinx.com<mailto:tanmay.shah@xilinx.com> This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

4 years, 1 month

1
0
0 0

2025

2024

2023

2022

2021

Openamp-system-reference